Festool ROTEX RO 90 DX FEQ Installation Manual - Original Instructions page 12

English
Delta sanding pad DSS-GE-STF-RO90 [7]
If the front tip of the StickFix pad [7-1] of your
delta sanding pad is worn, take it off and turn it
120°.
3
Slat sanding pad LSS-STF-RO90 [8]
If the StickFix coating of the slat sanding pad is
worn, the complete table can be replaced. Open
the screws to do this [8-1].
8.5 Attaching sanding accessories
The suitable StickFix sandpaper and StickFix
sanding cloth can be attached quickly and sim­
ply to the StickFix sanding pad.
► Press the self-adhesive sanding accessory
onto the sanding pad [1-7].
Use only abrasives with an undamaged
Stickfix hook-and-loop coating. Before
use, check that the coating has not been dam­
aged by improper use (such as overheating).
12
8.6 Attaching polishing accessories
To prevent damage, PoliStick accessories (pol­
ishing sponges, polishing felt, sheepskin) must
only be used on the special polishing pad.
► Press the self-adhesive polishing accessory
onto the sanding pad [1-9].
8.7 Dust extraction
WARNING
Dust hazard
► Dust can be hazardous to health. Always
work with a dust extractor.
► Always read applicable national regula­
tions before extracting hazardous dust.
At the extractor connector [1-5], a Festool mo­
bile dust extractor with an extraction hose di­
ameter of 27 mm can be connected.
Recommendation: Use an antistatic extractor
hose. This helps reduce the electric charge.
8.8 Edge protector [9]
The edge protector [1-1] reduces contact of the
sanding pad circumference with a surface (e.g.
when sanding along a wall or a window), thus
preventing back-kick of the machine, or ma­
chine damage.
click