Audiovox CDM-9000 Owner's Operating Manual page 11

After terminating the call, the number you entered can
be dialed by Q) .
Note: You can deactivate "Sending DTMF" so that key-
pad tones will not be transmitted to the calling
party. See Sending DTMF (F35) on page 58.
Automatic Talk Timer
The talk time of the current call will be automatically
displayed. For example, "1 h23m45s".
Caller ID with Name
This feature allows you to preview in your display the
number and name of the party calling you before you
answer the call. The name is as you programmed it in
your phonebook.
1. When the phone rings, the Calling Number ap-
pears in the display.
~ 8[Omi89 Ca "
2. The last 10 Caller IDs are JACK
stored in the memory for 123-456- 7890
your review and redial. See Call History on page
42 for details.
Note: "Number Restricted" or "Number Unavailable"
is displayed when the Caller ID is restricted or
not available.
Automatic Calls-in-Absence Indicator
This feature indicates the number of unanswered in-
coming calls. If incoming calls are not answered, the
LCD display will indicate "Called XX". "XX" is the num-
ber of calls (01 to 99) missed. Depressing any key will
clear the display.
Call Waiting
Your service provider may provide Call Waiting service.
When you are on a call, you may hear beep tone alert-
ing you of another incoming call. Your phone displays
"New Caller" and the new caller's ID with the name.
The name is as you programmed it in your phonebook.
1. Press (2) to answer the new call.
2. Press (2) again to switch between the two calls.
Three-Way Calling
Your service provider may provide Three-Way Calling
service. When a call is already in progress, you may
call the third party.
1. Enter a number and press (!:) to call the third
party.
2. Press (!:) again to connect all three parties.
Ask your service provider for the detailed information.
Standby
Ringing Tone with Melody
The CDM-9000 offers you 15 styles of ringer tones and
melodies for alerting incoming calls) Ringer volume can
also be adjusted. See RingTy~election (F32) on page
..
58 and Alert Tone Volume'Control (F31) on page 57 for
setting. See also Vibrator Alert (F8) on page 75.
Distinctive Ringing (Audible Caller ID)
You may program different ringer styles for different
phonebook addresses. See To Store a Ring Type with
the Phone Number on page 29 for setting.
Clock Indicator
Date and Time are automatically displayed, if this fea-
ture is enabled. See Clock Indicator (F42) on page 62
to turn this feature on/off.
Durinq Calls
Clock Alarm
This feature alert you repeatedly at the alarm time that
you programmed. See Clock Alarm (F44) on page 63
for setting.
Countdown Timer
This feature alerts you when the countdown timer ex.
pires. The timer can be set to 1 through 99 minutes
See Countdown Timer (F45) on page 64 for setting.
Scratch Pad Dialing
If you enter a telephone number during a call, the num
ber will be stored in the Scratch Pad memory.
2!J
llo