Battery Charging; Power Connection; Battery Talk Times; Battery Standby Times - Audiovox CDM-8910 User Manual

BATTERY USAGE
C

BATTERY CHARGING

H
1

POWER CONNECTION

1
Plug the AC Charger into a standard outlet.
2
Plug the other end of the AC Charger into the
bottom of your phone. The battery must be
installed on the phone.
• The battery is not charged at the time of purchase.
• Fully charge the battery before using it for the first time.
• It is more efficient to charge the battery with the handset
powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace
the battery.
• Phone LED will light red and "Charging..." will be displayed on
the screen while charging is in progress.
• Phone LED will light green and "Charging is complete!" will be
displayed on the screen when the battery is fully charged.
• Typical charge times for a full charge.
Standard Batteries : 2~3 hours/Extended Batteries : 3~4 hours
12
BATTERY USAGE

BATTERY TALK TIMES

The operating time is subject to your handset usage and configuration.
Battery Capacity CDMA PCS
STD 1000 mAh
200 m 190 m
EXT 1700 mAh 330 m 330 m

BATTERY STANDBY TIMES

The operating time is subject to your handset usage and configuration.
Battery Capacity
CDMA PCS
STD 1000 mAh 107~190 hours 150~250 hours
160~220 hours 380~450 hours
EXT 1700 mAh
These times are for a new battery. Talking and Standby time may
decrease over time.
13
C
H
1
AMPS
80 m
130 m
AMPS
20 hours
35 hours