Speaker Phone; Pause Feature; Answering A Call; 3-Way Call Function - Audiovox CDM-8910 User Manual

BASIC FUNCTIONS

SPEAKER PHONE

The speaker phone feature lets you listen to audio through the speaker
and talk without holding the phone.
C 1 To activate the speaker phone in idle, answering
H
or calling modes, press and hold
2
2
The phone returns to normal (speaker phone off)
after ending a call or when the phone is turned off
and back on.

PAUSE FEATURE

Pauses are used for automated systems (i.e., voice mail, calling cards).
Insert a pause after a phone number then enter another group of
numbers. The second set of numbers is dialed automatically after the
pause. This feature is useful for dialing into systems that require a code.
1
To insert a pause, enter a phone number then
press [MENU]. Select either a Hard Pause
("P" appears) or a Timed Pause ("T" appears).
2
Press to dial or [SAVE] to store.
Please refer to page 30 for more details about
storing a phone number.
22

ANSWERING A CALL

1 To answer a call, press any key except
or
l By pressing
.
Key" or "Send Key" to answer a call. lf "Send Key" is selected,
the phone can only be answered by pressing
2 To end the call, press
In Auto Answer Mode a call is automatically answered after a
preset number of ring tones. See page 73 for more details.

3-WAY CALL FUNCTION

With 3-Way Calling, you can talk to two people at the same time. When
using this feature, the normal airtime rates will be applied for each of the
two calls.
1
Enter the number you wish to call, then press
2
Once you have established the connection,
enter the second number you wish to call, then
press
3
When you're connected to the second party,
press
If one of the people you called hangs up during your call, you
and the remaining caller stay connected. If you initiated the call
and are the first to hang up, all three callers are disconnected.
BASIC FUNCTIONS
,
.
, you can select either "Any
.
.
.
again to begin your 3-Way call.
23
,
C
H
2
.