Audiovox CDM-4500 Operation Manual page 9

1. Press to answer the new call.
2. Press again to switch between the two calls.
Three- way Calling
Your Service provider may provide Three-Way calling service. When a call is already in progress, you may call the Third
party.
1. Enter a number and press
2. Press again to connect all three parties.
Ask your service provider for the detailed information.
Clock Indicator (Digital Mode Only)
When the phone is in an area with digital service (Digital Mode), Date and Time are automatically displayed, if this feature
is enabled.
Notes: 1. During Digital Mode, the
2. During Analog Mode, or while "No Service" is indicated, the time display is not available even if this feature
is enabled.
To utilize certain phone services, such as accessing an alternate long distance network, signaling a pager or banking by
phone etc., Touch Tone™ signaling is required. The following features will make it easy to send frequently used Touch
Tone™ signals.
Touch Tone™ from Display
When Sending DTMF mode is on, the number will be sent in Touch Tone™ signals during a call as you press digit keys.
When Sending DTMF mode is off, you can send Touch Tone™ signals in the following manner.
1. Enter the number
2. Press and scroll to "Tone".
3. Press . The number in the display will be sent in Touch Tone™ signals.
Touch Tone™ from Memory
Touch Tone™ signals can be sent from memory during a call.
1. Press , and recall the number you want to send in Touch Tone™ signals.
to call the third party.
Example:
indicator lights.
End to End Signaling
Standby