Accessing The Dvd Menu; Moving Through Chapters; Goto Search - Audiovox VM9224 Operating Instructions Manual

NOTE: For VCD play, the repeat function is not available if PBC is on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to repeat.
• Press the REPT A-B button (6) on the remote control (or the A-B button on
screen) to set the start point (A) of the repeated section.
• Press the REPT A-B button again once you reach the desired end point
(B) of the repeated section. The selected portion of the DVD will now
repeat continuously.
• Press the REPT A-B button again to cancel the A-B section setting and
stop repeat play.

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the main DVD
menu. Use the directional (arrow) buttons on the remote control to select a title
from the menu or touch the title on screen.
Press the TITLE button (2) on the remote control or on screen to select a
different title for playback.
Press the >/|| button (18) on the remote control or press the rotary encoder (7)
to confirm your selection and begin playback. You can also select a title using
the touch screen.

Moving Through Chapters

Press the >>| button (19) on the remote control or the >>| button on screen to
advance to the next chapter on the DVD.
Press the |<< button (17) on the remote control or the |<< button on screen to
move to the previous chapter.

Goto Search

During DVD or VCD playback, perform the following steps to use the GOTO
feature to access a specific location on a disc:
1. Press the GOTO button (21) on remote control to access the "Search"
screen.
2. Press the >> or << buttons (14, 22) on the remote control to select a
category.
30
VM9224