Pioneer SC-37 Service Manual page 97

5
QQ
3 7 63 1515 0
[When the PC and AV amplifier are connected via a DHCP router]
Be sure to confirm and note the IP address.
How to Confirm the IP Address
(1) Set the remote control to the receiver operation mode, then press HOME MENU.
A Graphical User Interface (GUI) screen appears on the TV.
Use and ENTER to navigate through the screens and select menu items.
Press RETURN to confirm and exit the current menu.
(2) Select 'System Setup' from the Home Menu.
(3) Select 'Network Setup' from the System Setup menu.
(4) Select the IP Adderss, Proxy.
3. The following steps are to be performed on the PC.
Open Internet Explorer on the PC.
When the AV amplifier is directly connected with the PC, enter "http:// 192. 168. 20. 15 " in the address box then
press the Enter key.
When the AV amplifier is connected via a DHCP router, enter the IP address of the AV amplifier you noted in the
address box then press the Enter key.
(1) Enter "http:// ***. ***. ***. *** (IP address of the AV amplifier)."
TE
L 13942296513
The following screen will be displayed.
Click on "Firmware Update."
www
.
5
http://www.xiaoyu163.com
6
x ao u163
y
i
6
http://www.xiaoyu163.com
7
2 9
8
This IP Address is an example.
(2) Click on the Update button or press the Enter key.
Q Q
3 6 7 1 3 1 5
co
.
SC-37
7
8
9 4 2 8
0 5 8 2 9 9 4 2 8
Click.
m
8
9 9
A
B
C
9 9
D
E
F
97