Advertisement
NOTES ON USE OF FRONT PANEL
1. Make sure the front panel is positioned correctly when
attaching it into the front mounting plate, as it cannot be
attached when up-side down. Use moderate pressure to
fully seat the panel into position.
FRONT PANEL
DISC EJECT
BUTTON (30)
BALL MECHANISM
(LEFT SIDE)
2. To verify correct panel installation, swing the panel as -
3. When taking the front panel with you, please use the sup -
PWR
COMPACT DISC PLAYER
CD-IN
TAPE-IN
T UN
E/ SE EK
CD-R PLAYBACK
/ TRA CK
1
2
3
VOL
RESET
DISC SLOT
BUTTON (29)
(20)
RESET
-9-
sembly up into position until it locks easily into place. If
any resistance is encountered, re-check panel orienta -
tion in chassis mounting plate.
plied carrying case to protect the panel from dirt and
damage. Make sure there is no dust or dirt on the
electrical terminals on the back of the panel as this could
cause intermittent operation or other malfunctions.
P-967
45 WATTS X 4
PANEL RELEASE
T/F
EQ
BUTTON (31)
R. SCN
4
5
6
BALL MECHANISM
(RIGHT SIDE)
Advertisement
