Lcd Display; Disc Select; Operating Instructions - Audiovox CDI-100M Owner's Manual

OPERATING INSTRUCTIONS

1

LCD DISPLAY

The LCD Display Panel will illuminate when the CD changer is
operating. Different symbols will appear depending on the
function and operation in use. Each display is explained in the
applicable function explanation below.
2
PLAY / PAUSE ( /
Pressing this button turns on the CD changer system, illuminates
the LCD panel and begins play of disc #1 if a new CD magazine
has been loaded into the changer. If a magazine was already in
the changer, play will resume from the track on the disc previously
in play. Play of the disc is shown by the indication
rotating disc symbol on the LCD panel. Pressing the button again
will temporarily stop play of the disc. The pause indication
be shown on the LCD panel and the disc symbol will stop rotating
and flash instead. Press the button again to resume play of the disc.
)
and the
NOTE: If left in the PAUSE mode for 5 minutes, the unit will
automatically shut off.
3
POWER OFF SWITCH (OFF)
Press this button to turn the CD changer off and return to radio or
tape operation of the car stereo.
4

DISC SELECT (

Press the Disc Select button to select the desired disc for play as
shown on the LCD panel. The unit will automatically load the
will selected disc and begin play. To advance to a higher number
disc, press the
number, press the
-2-
CDI-100M
)
side of the button. To return to a lower
side.