Service Tools; Product Specific Tools - Nokia 6120 classic Service Manual

RM-243
Service Tools and Service Concepts

Service tools

Product specific tools

The table below gives a short overview of service tools that can be used for testing, error analysis and repair
of product RM-243, refer to various concepts.
Issue 1
FS-63
For flashing (also dead phones) with SS-46. RF testing and tuning, and
EM calibration on ATO level with SS-62 (mechanical locking concept),
CU-4 supported.
MJ-135
MJ-135 is meant for troubleshooting, testing, tuning and flashing on
the engine level (CU-4 supported).
The jig includes an RF interface for GSM, WCDMA and Bluetooth.
RJ-176
RJ-176 is a soldering jig used for soldering and as a rework jig for the
engine module.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Flash adapter
Module jig
Soldering jig
Page 2 –5