NBE RTB Manual
Hide thumbs Also See for RTB:

Advertisement

Quick Links

UK
Version 2.000001
RTB - Ready To Burn

Advertisement

Table of Contents
loading

Summary of Contents for NBE RTB

  • Page 1 Version 2.000001 RTB - Ready To Burn...
  • Page 2: Table Of Contents

    Dear Customer, Thank you for purchasing this NBE product which is designed and manufactured to the highest standards in the EU. In order for you to get the most out of your product, we strongly recommend that you carefully read this manual prior to installation and operation. In the event that you encounter any difficulties during installation or operation, we recommend that you first refer to this manual or the information provided in the support section on www.nbe.dk or www.nbe-...
  • Page 3: Big Bags

    With a PELVAC sytem you are able to transport pellets around corners, through walls, and at distances upto 15 meters. In short, you can transport your pellets in a multitude of ways that are difficult or impossible with auger conveyance. 1.1 Contents: PELVAC contains the following: - Vacuum unit with controller, cyclone, ‘air locking’...
  • Page 4: Technical Data

    2.1 Technical data Vacuum motor Wall Mount Filter Cyclone Controller Rotary Valve...
  • Page 5 2.2 Technical data Standard Vacuum motor 600w Rotary valve motor Hose diameter 50mm Max ceiling height 2,5m Max. Transport range with smooth pipes. Capacity 60kg/time Noise level: 70dB Connection VAC / Hz 230/50 Extraction auger motor Electrical Consumption/ ton 10kW Max.
  • Page 6 Put overpressure back into the top of the storage unit. 3.1 Installation in V-bottom Important-Only use one extraction hole in the auger Put overpressure back into the top of the storage unit. 3.2 Installation Clothe Silo...
  • Page 7: Transport

    4.1 Transport: MAIN MENU TRANSPORT TIMING CONSUMPT. VARIOUS MANUAL ON/OFF UP/DOWN TRANSPORT Driving Time 5 min RESET / Overrun Time (Vac) 10 sec MENU ALARM Pause Time 10 sec Start Delay 5 min Por. After Alarm 2 Dutycycle Auger 70 % Distance Start 70 cm Distance Stop...
  • Page 8 4.2 Timing: MAIN MENU TRANSPORT TIMING CONSUMPT. VARIOUS MANUAL TIMING MO-FR Start 1 12.05 MO-FR Start 2 MO-FR Start 3 SA-SU Start 1 SA-SU Start 2 SET CLOCK 9.35 SET WEEKDAY SET DATE SET MONTH SET YEAR MA-FR Start 1-3: Specify when the vacuum system should run.
  • Page 9: Timing

    4.3 Consumption: Number of Cycles: Displays the number of times the system has cycled. MAIN MENU TRANSPORT Reset Cycles: Resets the counter for the number of cycles TIMING performed CONSUMPT. VARIOUS Consumpt.( kWh): Displays how many kWh of electricity the system has used.
  • Page 10: Log

    4.5 LOG: LOG: The last 50 events are logged here. MAIN MENU TRANSPORT TIMING CONSUMPT. VARIOUS MANUAL 1 MON 05.34 2 MON 03.55 3 SUN 22.45 4 SUN 21.34 5 SAT 23.55 6 SAT 20.12 4.6 Manual: Activate Auger: Activates extraction auger motor manually. MAIN MENU For example, use to test function.
  • Page 11 This allows the controller to calculate distance. Where can I purchase smooth vacuum pipes? Contact your NBE dealer. Where can I purchase the pipe bends for the 50mm pipes? These fittings are common at any home building or plumbing store.
  • Page 12 Wood pellets are jamming the rotary valve in the vacuum unit. 1. Turn down the Durtycycle % under Menu TRANSPORT. This will prevent the rotary valve from over filling. 2. Make sure that your wood pellets are no longer than 35mm. There is not enough suction.
  • Page 13 Never touch or handle the auger when the system is powered. There will be no warning when the system starts. The system is provided with an electric current of 230V / 50Hz. An incorrect installation or improper repair can cause life-threatening electric shock. Electrical connection must be performed by the person who has the right skills and competences.
  • Page 14: Producer

    NBE hereby confirms, that this product has been produced in accordance with: Low Voltage Directive 2006/95/EC Electromagnetic Compatibility Directive 2004/108/EC Machine Directive 2009/125/CE This symbol indicated on the product confirms that the product has been produced in accordance with the above directives.

Table of Contents