D-Link DAP-2682 User Manual page 45

Section 3 - Configuration
Get IP From:
Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in your
network, or if you wish to assign a static IP address
to the DAP-2682. When Dynamic IP (DHCP) is
selected, the other fields here will be grayed out.
Please allow about 2 minutes for the DHCP client
to be functional once this selection is made.
IP Address:
Assign a static IP address that is within the IP
address range of your network.
Subnet Mask:
Enter the subnet mask. All devices in the network
must share the same subnet mask.
Gateway:
Enter the IP address of the gateway/router in
your network.
DNS:
Enter a DNS server IP address. This is usually the
local IP address of your gateway/router.
Passcode Quantity:
Enter the number of ticket that will be used here.
Duration:
Enter the duration value, in hours, for this
passcode.
Last Active Day:
Select the last active date for this passcode here.
Year, Month and Day selections can be made.
User Limit:
Enter the maximum amount of users that can use
this passcode at the same time
D-Link DAP-2682 User Manual 45