Control Panel - Whirlpool WVFC750AJGR Instruction Manual

DETERGENT Indicator
• These are the spoon indications of
the DETERGENT volume.
• Refer to "DETERGENT AND LOAD
RECOMMENDATIONS" on page 11.
Whfttjtool
WATER LEVEL Button
• You can choose the appropriate
water level that matches the
iaundng load.
• Different water levels for washing,
rinsing optional. For detailed
operation, please refer to Page 11
9

CONTROL PANEL

Digital Display Indicator
• This indicator shows remaining time
( E.g. )
Remaining time is 20 minutes �
• When setting FUNCTION, the
digital display indicate the
number of times. ( E .g. )
Twice Water Saver Rinsed [[]
rn
• This indicator shows water level.
( E.g. )
Water level is 22 L
DETERGENT
� ..... ~ 8
� ..... 5-6
bf , .... 3 ~ 4
bf , .... 1 ~2
POWER RI N SE
WATER
SET
LEVEL
FUNCTION and SET Button
• The FUNCTION and SET button
can be used to select TIME DELAY,
WASH time, RINSE times,
and SPIN time. For example,
to set Rinse times: Press the
FUNCTION button till RINSE light
flashes. Then, press the SET
button to choose the number of,
rinse times.
• This indicator shows when the washing
is finished during time delay function.
( E .g.)
Finish washing 2 hours later [[]
• When abnormal conditions occur,
the indicator will indicate warning.
( E.g.)
[§:I]
Water does not flow
... TIME
m DEL AY : : : ����: (01 I
m
MIN.
WASH
L
"""WASH
m
::: RINSE DELICATE
... EXPRESS
::: SPIN
_J
::: WASH
FUNCTION
PROGRAM
,,,:'..o
4SEC.
PROGRAM Button
• To choose the washing program,
press the PROGRAM button.
Press PROGRAM to switch
between specialized programs:
MIXED, STAIN WASH, EXPRESS
WASH, DELICATE .
• You can set the CHILD LOCK
function. Refer to the CHILD LOCK
START/PAUSE Button
• This button can be use to start the
washer .
• This button can also be used to
temporarily stop the washer.
To restart the washer , press
the START / PAUSE button again.
NOTE:
• This is not a cancel button.
• If you want to tum off the END Buzzer,
press the START/PAUSE button and
hold it down for about 4 seconds until
beeping stops.
ST R T Stain Wash
6
PAUSE
sense
�POWER
7.5kg
ON/OFF
\.:::.,}
POWER ON/OFF Button
To turn the power on, press the POWER
ON/OFF. When you want to turn off the
power, press the POWER ON/OFF again.
When the washing has finished, the power
will turn off in 5 seconds
automatically. (except Setting Remained
water Draining function).
NOTE:
• If you want to change the wash PROGRAM,
turn the POWER ON/OFF off and then,
turn it on again.
• If you leave the washer turned on
without starting the operation, the power
will turn off in 10 minutes autamatically.
10