Advertisement
AT871R
AT871RW
Polar Pattern
0
330
300
270
240
210
180
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
same as 1 kHz
Dimensions
2.76"
70.0 mm
4.72"
120.0 mm
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
Form No. 0310- 0854 -01-B/W P50878-01 © 1998 Audio-Technica U.S., Inc. Printed in U.S.A.
AT 8 71 R/AT 8 71 RW SPECIFICATIONS
ELEMENT
POLAR PATTERN
30
FREQUENCY RESPONSE
OPEN CIRCUIT SENSITIVITY
60
IMPEDANCE
MAXIMUM INPUT SOUND LEVEL
DYNAMIC RANGE (TYPICAL)
SIGNAL-TO-NOISE RATIO
90
PHANTOM POWER REQUIREMENTS
WEIGHT (LESS CABLE)
DIMENSIONS
120
OUTPUT CONNECTOR
150
CABLE
ACCESSORY FURNISHED
OPTIONAL INTERCHANGEABLE ELEMENTS
5.71"
145.0 mm
0.67"
17.0 mm
†
Fixed-charge back plate
permanently polarized condenser
Half-cardioid (cardioid in hemisphere above
mounting surface)
30 -20,000 Hz
–33 dB (22.4 mV) re 1V at 1 Pa*
200 ohms
130 dB SPL, 1 kHz at 1% T.H.D.
103 dB, 1 kHz at Max SPL
1
67 dB, 1 kHz at 1 Pa*
9-52V DC, 2 mA typical
14.6 oz (415 grams)
4.72" (120.0 mm) max width,
5.71" (145.0 mm) max length,
0.67" (17.0 mm) height
TB3M-type
25' (7.6 m) long, 0.13" (3.2 mm) diameter,
2-conductor, shielded cable with TA3F and
XLRM-type connectors
Soft protective pouch
AT853H-ELE hypercardioid (100°)
AT853O-ELE omnidirectional (360°)
AT853SC -ELE subcardioid (170°)
†
In the interest of standards development, A.T.U.S. offers
full details on its test methods to other industry
professionals on request.
* 1 Pascal = 10 dynes/cm
1
Typical, A-weighted, using Audio Precision System One.
Optional Accessories:
• CP8201 line matching transformer
(Lo-Z to 50,000 ohms).
• AT8202 adjustable in-line attenuator for use
with balanced Lo-Z microphones.
• AT8314 2-conductor, shielded, vinyl- jacketed,
broadcast-type cable with XLRF-type connector
at microphone end, XLRM-type connector at
equipment end. Available in 10', 20', 25', 30',
50' & 100' lengths.
• CP8506 four-channel 48V phantom power
supply (AC powered).
• AT8801 single-channel 48V phantom power
supply (AC powered).
Audio -Technica microphones and accessories pur-
chased in the U.S.A. are warranted for one year from
date of purchase by Audio-Technica U.S., Inc. (A.T.U.S.)
to be free of defects in materials and workmanship. In
event of such defect, product will be repaired promptly
without charge or, at our option, replaced with a new
product of equal or superior value if delivered to
A.T.U.S. or an Authorized Service Center, prepaid,
together with the sales slip or other proof of purchase
date. Prior approval from A.T.U.S. is required for
return. This warranty excludes defects due to normal
wear, abuse, shipping damage, or failure to use product
in accordance with instructions. This warranty is void in
the event of unauthorized repair or modification.
For return approval and shipping information, con-
tact the Service Department, Audio -Technica U.S., Inc.,
1221 Commerce Drive, Stow, Ohio 44224.
Except to the extent precluded by applicable state law,
A.T.U.S. will have no liability for any consequential,
incidental, or special damages; any warranty of
merchantability or fitness for particular purpose
expires when this warranty expires.
This warranty gives you specific legal rights, and you
may have other rights which vary from state to state.
Outside the U.S.A., please contact your local dealer
for warranty details.
2
= 10 microbars = 94 dB SPL
One-Year Limited Warranty
Advertisement
