Assemble Of Ui Module - Nokia 7600 Disassembly Instructions Manual

NMM-3
5 - Disassembly Instructions
Assembly of UI Module
Page 5-14
Company Confidential
Copyright  2003 Nokia Corporation.
Company Confidential
CCS Technical Documentation
9 (iii). Removing the Vibra Motor.
9
(iii)
10. Ensure each of the three keys is
10
fully assembled into their apertures.
Ensure the bottom of the key is
aligned into the B-Cover with the
face being pushed through the aper-
ture in the B-Cover. The key flanges
must be tight up against the B-Cover
flange with no gap.
Note: Ensure the Class I faces of the
keys are not touched or damaged
during the assembly sequence.
1. Place the earpiece into the LCD
1
frame, ensuring the alignment fea-
ture on the device is aligned with the
slot in the frame. Press the device
into the frame.
Note: Ensure the metal body of the
earpiece is not distorted and the con-
tacts are not deformed. Ensure the
earpiece is fully assembled into the
LCD frame.
Issue 1 (11/2003)