Diaphragm Replacement
THIS IS JUST IN CASE YOU BLOW YOUR TWEETER UP!
FIRST THINGS FIRST:
Pull the Insulated 0.25" Push-Ons off the Back Cover
connections to the tweeter crossover as shown
to the right The Back cover needs to be removed.
These are 4 - PHIILIPS head machine screws.
Remove them with a #2 PHILIPS screw driver
and put them in a ZipLock bag so you dont
loose them.
Philips Screw
Driver
8
BE CAREFUL lift the Back Cover/Diaphragm
assembly out from the midbass magent
structure (as shown)
CVBCD
( Tweeter Diaphrapm
Replacement Assembly)