Testing; Figure 4. Connection - Power Antenna Control - Nokia NME-2A Series Installation Instructions Manual

P.A.M.S.
Technical Documentation
Supply for de-
vice
From ANTC line
(orange wire)
Figure 4. Connection – Power Antenna Control

Testing

Once installed, the equipment should be tested to ensure that it is
operating satisfactorily and that the position of the units does not impair on
the driver's ability to control and operate the vehicle in any way.
Use the phone to make a call when the vehicle is parked with the engine
running. During the call, switch off the engine. Ensure that the phone is
operational with the engine running and with the engine switched off. For
operating information refer to the 'User Guide' supplied with the phone.
Original 08/97
Bosch P/N 0–332–204–150 12
V, 30 A. SPDT
12 V d.c.
30
86
Fuse 200 mA
(not supplied)
Installation Instructions
87A
CONTROLLED
DEVICE, e.g.
MOTOR AN-
GND
87
TENNA
GND
85
NME–2A
Page 13