Breville Bambino BES450 Instruction Book page 13

PRE-PROGRAMMED SHOT VOLUME
- 1 CUP
Press the 1 Cup button for less than 1 second,
the button will flash indicating that it has been
selected. A preset single espresso volume of
approximately 30ml will be extracted. The
machine will automatically stop once the
pre-set volume has been extracted.
PRE-PROGRAMMED SHOT VOLUME
- 2 CUP
Press the 2 Cup button for less than a second,
the button will flash indicating that it has been
selected. A preset double espresso volume of
approximately 60ml will be extracted. The
machine will automatically stop once the pre-set
volume has been extracted.
NOTE
Pressing the corresponding 1 Cup or 2 Cup
button during the programmed espresso
extraction will immediately stop the extraction.
PROGRAMMING COFFEE VOLUME
Press and hold the 1 Cup and 2 Cup buttons for
2 seconds, the buttons will illuminate and flash.
+
To set the 1 Cup volume:
• Press the 1 Cup button for about 3 seconds to
start the extraction.
• Press the 1 Cup button again to stop the
extraction. The modified volume will be
saved.
To set the 2 Cup volume, follow the above steps
and select the 2 Cup button to start and stop
the extraction.
NOTES
• If no user input after 30 seconds. Machine
returns to 'ready mode'
• The modified coffee volume will be saved
into memory for the next use or when the
machine is re-started.
• Pressing the steam or hot water button at
any stage will cancel the operation and the
machine will return to ready mode without
saving any coffee volume program.
+
MANUAL PRE-INFUSION AND SHOT
VOLUME
Press and hold the 1 Cup or 2 Cup button for
more than a second. After one second the
pump will start at pre-infusion pressure and
continue while button is pressed. Release the
button to start the extraction. Press any button
again to stop the extraction.
2s
OFF
13