On A Wall - Samsung Max Heat 2.0 Technical Data Book

11. Installation
Outdoor Unit Installation

On a wall

WARNING
• The unit must be properly secured to the wall. If the
unit falls, it may result in crushing, electric shock, fire,
or explosion that could cause death, severe personal
injury, or property damage.
1 At the selected installation location attach the
L-bracket to the wall as follows:
- Install the bracket as close to the wall as possible.
- Insert rubber isolators between the bracket and
the wall to minimize sound and vibration to the
structure. Do not fully compress the isolators.
Soft rubber designed to cut off residual vibration
from outdoor unit to rack (not supplied with product)
Soft rubber designed to cut off vibration from
rack to wall (not supplied with product)
- Make sure that the bracket is level.
- Use suitable bolts/washers and lock washers.
2 Place the outdoor unit on the bracket, ensuring proper
clearances and with the arrow on top of the unit
pointing away from the wall.
3 Clip the rubber feet to the tabs to minimize sound and
vibration to the structure.
4 Level the unit, then use anchor bolts to secure it at the
four mounting points.
5 For installations in locations that require seismic or
hurricane tie downs, comply with local codes.
59