Scanning Operation; Scanning Channels - Yaesu FTA-750L Spirit Operating Manual

The FTA-750L/FTA-550/FTA-450L allow you to scan
active channels automatically in the COMM (COM &
NAV band), MR, and WX modes. It pauses on signals
encountered, so you can talk to the station(s) on that fre-
quency if you like.

Scanning Channels

1. Set the radio to the COMM mode.
2. Press the [ MENU ] key to display the MENU screen.
3. Select "FUNC" on the screen by pressing the [ ◄ ] or
[ ► ] key, and then press the [ ENT ] key.
4. Select "SCAN" on the
screen by pressing the
[ ◄ ] or [ ► ] key, and
then press the [ ENT ]
key.
The scanning starts and the display returns to the
COMM mode screen.

Scanning Operation

FUNCTION
SCAN MEM OFF
DUAL WATCH OFF
SCAN OFF
SPLIT OFF
LOGGER OFF
 The scanner searches signals from the lower fre-
quency to higher.
 When the scanner encounters a signal, the scanning
pauses and the radio remains on that channel until
the signal disappears, and the frequency indication
on the display blinks.
 After the signal disappears, the scanning resumes.
 To stop the scanning,
press the PTT switch, or
select "SCAN" again in
the FUNCTION menu.
Next time the scanning is activated, the search will
start from the frequency at which the scanning was
stopped last time.
FUNCTION
SCAN MEM OFF
DUAL WATCH OFF
SCAN ON
SPLIT OFF
LOGGER OFF
59