Sony KD-43X7 F Series Service Manual page 68

2018/05/04 04:12:02 (GMT+09:00)
3.12 HDMI No Picture
3.12.4 I2C Failure Analysis
Failure Analysis
Check impedance of
Resistor during AC OFF
HDMI1: RB4001
HDMI2: RB4002
HDMI3: RB4000
[NG] Impedance ≠ 47k Ω
Replace Broken
Resistor and Re-verify
[OK] Picture recovered
I2C
[OK] Impedance
[NG] No Picture
END
TV Business Division
Checking condition:
- TV ON & HDMI Source ON except if the flow mentioned is AC OFF.
- TV HDMI input connected to HDMI source (Player etc.)
- TV Input Selection: HDMI
Check I2C GPIO Line
≈ 47k Ω
impedance to Ground
during AC OFF
HDMI1: CN4001 – Pin15&16
HDMI2: CN4002 – Pin15&16
HDMI3: CN4000 – Pin15&16
[NG] HDMI1 Impedance ≠ 140kΩ ±5%
[NG] HDMI2 Impedance not Open (High z)
[NG] HDMI3 Impedance ≠ 140kΩ ±5%
Internal Main IC (SoC)
Broken (IC5000)
Replace B-Board
and Re-Verify
[OK] HDMI1 Impedance ≈ 140kΩ ±5%
[OK] HDMI2 Impedance Open (High Z)
[OK] HDMI3 Impedance ≈ 140kΩ ±5%
"TMDS Failure
68
Go to
Analysis"
Page
(Supplementary
68
information)
SYS SET