4.9B WB/MURA/CUC Data Transfer
1)
Select "Panel/PQ". Press "Enter" or ""
Select WB/MURA/CUC Data Transfer
2) (a) Select
"WB/Gamma data
(b) To change the items, press "←" or "→" on remote commander and press "Enter" button.
select "1. T-con to SoC" for each items.
(c) Select "[start]" and press "Enter" button to start transfer.
transf" by pressing "↑" or "↓" on remote commander.
1. T-con to
SoC
1. T-con to
Remark#1
SoC
1. T-con to
AC OFF/ON TV is required for the data to be reflected and updated
SoC
into the TV's NVM.
Please apply this Action when Main board or panel is replaced.
128
SYS SET