Specifications - Sony NEX-FS700 Service Manual

Interchangeable lens digital hd video camera recorder
Hide thumbs Also See for NEX-FS700:
Table of Contents

Advertisement

These specifications are extracted from the instruction manual of
NEX-FS700/FS700K/FS700E/FS700EK/FS700U/FS700UK.
System
REMOTE jack
Stereo mini-minijack (Ø 2.5 mm)
Video signal
HDMI OUT jack
NTSC color, EIA standards
HDMI Connector (Type A)
HDTV 1080/60i, 1080/60p, 720/60p
specification
SDI OUT jack
PAL color, CCIR standards
BNC
HDTV 1080/50i, 1080/50p, 720/50p
SMPTE259M/292M/424M/425M
compatible
specification
USB jack
Video recording system
mini-AB
HD image quality: MPEG-4 AVC/
i (headphones) jack
H.264 AVCHD format Ver. 2.0
Stereo minijack (Ø 3.5 mm)
compatible
INPUT1/INPUT2 jacks
SD image quality: MPEG-2 PS
XLR 3-pin × 2, female,
Audio recording system
MIC: -48 dBu/3 kΩ (kilohms)
Linear PCM 2ch (48 kHz 16-bit)
LINE: +4 dBu/10 kΩ (kilohms)
Dolby Digital 2ch (48 kHz 16-bit)
(0 dBu = 0.775 Vrms)
Dolby Digital Stereo Creator employed
Still image recording system
DCF Ver. 2.0 Compatible
LCD screen
Exif Ver. 2.3 Compatible
Picture
MPF Baseline Compatible
8.8 cm (3.5 type, aspect ratio 16:9)
Recording media (movies/still images)
Total dot number
"Memory Stick PRO Duo" media
921 600 (1 920 × 480)
Flash memory units
SD card (Class 4 or faster)
General
Image device
Power requirements
"Exmor" Super35 CMOS sensor
DC 7.2 V (battery pack)
25.5 mm × 15.6 mm
DC 7.6 V (AC Adaptor)
Gross: Approx. 11 600 000 pixels
Average power consumption
Effective (movie): Approx. 8 300 000
During camera recording using the
pixels (16:9)
microphone ECM-XM1, LCD with
Effective (photo): Approx. 8 400 000
normal brightness (using the E 18-200
pixels (16:9), Approx. 7 100 000 pixels
mm F3.5-6.3 OSS lens*)
(3:2)
When selecting [60i]: 9.6 W
Recording pixels (photo):
When selecting [50i]: 8.8 W
Approx. 8 300 000 pixels (16:9),
When Flash Memory Unit HXR-
Approx. 7 000 000 pixels (3:2)
FMU128 is used, the average power
Color temperature
consumption increases about 1.1 W.
[AUTO]
Operating temperature
(one push) A/B
0 °C to 40 °C (32 °F to 104 °F)
[INDOOR] (3 200K)
Storage temperature
[OUTDOOR] (5 800K)
-20 °C to +60 °C (-4 °F to +140 °F)
Minimum illumination
Dimensions (approx.)
1.2 lx (lux)* with Shutter Speed 1/24,
Camcorder body only (including the
auto gain control, auto iris (when
projecting parts):
selecting [60i])
145 mm × 178.5 mm × 253.5 mm
1.5 lx (lux)* with Shutter Speed 1/25,
(5 3/4 in. × 7 1/8 in. × 10 in.) (w/h/d)
auto gain control, auto iris (when
When recording (including the
selecting [50i])
projecting parts):
* Using the E 18-200mm F3.5-6.3 OSS lens
195.5 mm × 202.5 mm × 569.5 mm
(7 3/4 in. × 8 in. × 22 1/2 in.) (w/h/d)
Input/output connectors
(With the accessories (lens*, lens
VIDEO OUT jack
hood*, large LCD viewfinder, large
Pin connector
eyecup, handle, microphone (ECM-
1 Vp-p, 75 Ω (ohms) unbalanced, sync
XM1), and grip (without the belt)
negative
attached.))
AUDIO OUT jacks
Mass (approx.)
Pin connectors
Camcorder body only:
-10 dBu (at load impedance 47 kΩ
1 680 g (3 lb 11 oz)
(kilohms)), Output impedance with less
When recording:
than 2.2 kΩ (kilohms)
3 060 g (6 lb 12 oz) (With the
(0 dBu = 0.775 Vrms)
accessories (battery pack (NP-F770),
COMPONENT OUT jack
lens*, lens hood*, large LCD
Mini-D jack
viewfinder, large eyecup, handle,
Y: 1 Vp-p, 75 Ω (ohms)
microphone (ECM-XM1), grip, and
P
/P
, C
/C
: 0.7 Vp-p, 75 Ω (ohms)
flash memory unit cover) attached.)
B
R
B
R
* Supplied with NEX-FS700UK/FS700EK/
FS700K
NEX-FS700/FS700K/FS700C/FS700CK/FS700E/FS700EK/FS700J/FS700JK/FS700R/FS700RH/FS700U/FS700UK

SPECIFICATIONS

AC Adaptor AC-PW10
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
Power consumption
24 W
Output voltage
DC 7.6V*
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
127 mm × 35 mm × 63 mm
(5 in. × 1 7/16in. × 2 1/2in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
300 g (10 oz.) excluding the power cord
(mains lead)
* See the label on the AC Adaptor for other
specifications.
Charger AC-VL1
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
Power consumption
22 W
Output voltage
DC 8.4 V*
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
136 mm × 51 mm × 90 mm
(5 3/8 in. × 2 1/8 in. × 3 5/8 in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
270 g (9.6 oz) excluding the power cord
(mains lead)
* See the label on the Charger for other
specifications.
Rechargeable battery pack NP-F770
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Maximum charge voltage
DC 8.4 V
Maximum charge current
3.0 A
Capacity
Typical: 31.7 Wh (4 400 mAh)
Minimum: 30.0 Wh (4 200 mAh)
Type
Li-ion
* Minimum focus is the shortest distance from the
image sensor to the subject.
Design and specifications are subject to change
without notice.
These specifications are extracted from the instruction manual of
NEX-FS700R/FS700RH.
System
Video signal
NTSC color, EIA standards
HDTV 1080/60i, 1080/60p, 720/60p
specification
PAL color, CCIR standards
HDTV 1080/50i, 1080/50p, 720/50p
specification
Video recording system
HD image quality: MPEG-4 AVC/
H.264 AVCHD format Ver. 2.0
compatible
SD image quality: MPEG-2 PS
Audio recording system
Linear PCM 2ch (48 kHz 16-bit)
Dolby Digital 2ch (48 kHz 16-bit)
Dolby Digital Stereo Creator employed
Still image recording system
DCF Ver. 2.0 Compatible
Exif Ver. 2.3 Compatible
MPF Baseline Compatible
Recording media (movies/still images)
"Memory Stick PRO Duo" media
Flash memory units
SD card (Class 4 or faster)
Image device
"Exmor" Super35 CMOS sensor
25.5 mm × 15.6 mm
Gross: Approx. 11 600 000 pixels
Effective (movie): Approx. 8 300 000
pixels (16:9)
Effective (photo): Approx. 8 400 000
pixels (16:9), Approx. 7 100 000 pixels
(3:2)
Recording pixels (photo):
Approx. 8 300 000 pixels (16:9),
Approx. 7 000 000 pixels (3:2)
Color temperature
[AUTO]
(one push) A/B
[INDOOR] (3 200K)
[OUTDOOR] (5 800K)
Minimum illumination
1.2 lx (lux)* with Shutter Speed 1/24,
auto gain control, auto iris (when
selecting [60i])
1.5 lx (lux)* with Shutter Speed 1/25,
auto gain control, auto iris (when
selecting [50i])
* Using the E PZ 18-200mm F3.5-6.3 OSS lens
Input/output connectors
VIDEO OUT jack
Pin connector
1 Vp-p, 75 Ω (ohms) unbalanced, sync
negative
AUDIO OUT jacks
Pin connectors
-10 dBu (at load impedance 47 kΩ
(kilohms)), Output impedance with less
than 2.2 kΩ (kilohms)
(0 dBu = 0.775 Vrms)
COMPONENT OUT jack
Mini-D jack
Y: 1 Vp-p, 75 Ω (ohms)
P
/P
, C
/C
: 0.7 Vp-p, 75 Ω (ohms)
B
R
B
R
– 2 –
SPECIFICATIONS
REMOTE jack
AC Adaptor AC-PW10
Stereo mini-minijack (Ø 2.5 mm)
Power requirements
HDMI OUT jack
AC 100 V - 240 V, 50 Hz/60 Hz
HDMI Connector (Type A)
Power consumption
SDI OUT jack
24 W
BNC
Output voltage
SMPTE259M/292M/424M/425M
DC 7.6V*
compatible
Operating temperature
USB jack
0 °C to 40 °C (32 °F to 104 °F)
mini-AB
Storage temperature
i (headphones) jack
-20 °C to +60 °C (-4 °F to +140 °F)
Stereo minijack (Ø 3.5 mm)
Dimensions (approx.)
INPUT1/INPUT2 jacks
127 mm × 35 mm × 63 mm
XLR 3-pin × 2, female,
(5 in. × 1 7/16in. × 2 1/2in.) (w/h/d)
MIC: -48 dBu/3 kΩ (kilohms)
excluding the projecting parts
LINE: +4 dBu/10 kΩ (kilohms)
Mass (approx.)
(0 dBu = 0.775 Vrms)
300 g (10 oz.) excluding the power cord
(mains lead)
* See the label on the AC Adaptor for other
LCD screen
specifications.
Picture
8.8 cm (3.5 type, aspect ratio 16:9)
Total dot number
Charger AC-VL1
921 600 (1 920 × 480)
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
General
Power consumption
22 W
Power requirements
Output voltage
DC 7.2 V (battery pack)
DC 8.4 V*
DC 7.6 V (AC Adaptor)
Operating temperature
Average power consumption
0 °C to 40 °C (32 °F to 104 °F)
During camera recording using the
Storage temperature
microphone ECM-XM1, LCD with
-20 °C to +60 °C (-4 °F to +140 °F)
normal brightness (using the E PZ 18-
Dimensions (approx.)
200mm F3.5-6.3 OSS lens*)
136 mm × 51 mm × 90 mm
When selecting [60i]: 9.9 W
(5 3/8 in. × 2 1/8 in. × 3 5/8 in.) (w/h/d)
When selecting [50i]: 9.0 W
excluding the projecting parts
When Flash Memory Unit HXR-
Mass (approx.)
FMU128 is used, the average power
270 g (9.6 oz) excluding the power cord
consumption increases about 1.1 W.
(mains lead)
Operating temperature
* See the label on the Charger for other
0 °C to 40 °C (32 °F to 104 °F)
specifications.
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
Rechargeable battery pack NP-F770
Camcorder body only (including the
Maximum output voltage
projecting parts):
DC 8.4 V
145 mm × 178.5 mm × 253.5 mm
Output voltage
(5 3/4 in. × 7 1/8 in. × 10 in.) (w/h/d)
DC 7.2 V
When recording (including the
Maximum charge voltage
projecting parts):
DC 8.4 V
195.5 mm × 202.5 mm × 569.5 mm
Maximum charge current
(7 3/4 in. × 8 in. × 22 1/2 in.) (w/h/d)
3.0 A
(With the accessories (lens*, lens
Capacity
hood*, large LCD viewfinder, large
Typical: 31.7 Wh (4 400 mAh)
eyecup, handle, microphone (ECM-
Minimum: 30.0 Wh (4 200 mAh)
XM1), and grip (without the belt)
Type
attached.))
Li-ion
Mass (approx.)
Camcorder body only:
Design and specifications are subject to change
1 680 g (3 lb 11 oz)
without notice.
When recording:
3 220 g (7 lb 1 oz) (With the
• Manufactured under license from Dolby
accessories (battery pack (NP-F770),
Laboratories.
lens*, lens hood*, large LCD
viewfinder, large eyecup, handle,
microphone (ECM-XM1), grip, and
flash memory unit cover) attached.)
* Supplied with NEX-FS700RH
– ENGLISH –

Advertisement

Table of Contents
loading

Table of Contents