Serene Sereonic BT-200 Operating Manual page 7

04 Connect to Optical Audio output on your TV:
Connect the Base to the TV Optical audio output using the
supplied optical cable as shown below. Please make sure Digital
Audio setting is set to PCM format. You can change your audio
setting in the audio/sound section of your TV menu.
Optical Audio Cable*
*(Please remove plastic cap from
Optical cord tips)
AC Adapter
Copyright 2020 Serene Group, Inc. All rights reserved.
TV Optical Out
Fig. 4
05 Connect to HDMI output on your Satellite/Cable box:
This connection requires HDMI converter (sold separately).
01. First connect HDMI cable from the HDMI out on your
Satellite/Cable-box to the HDMI input on the converter
02. Connect another HDMI cable from the converter HDMI
output to the HDMI input on your TV.
03. Connect the Base to the HDMI converter using the
supplied RCA to 3.5mm cable as shown below.
Cable/Satellite Box or
Set Top Box
HDMI OUT
HDMI to Analog
Converter
HDMI OUT
HDMI IN
Audio
HDMI Cable
Cable
HDMI IN
HDMI Cable
AC
Adapter
Fig. 5
Base
06.