Serene Sereonic BT-200 Operating Manual page 11

03. The Speaker will turn off when timer has expired after
1-hour.
04. To enable the Speaker sound again after the timer has
expired, turn the volume knob all the way to off, and then
back on again.
05. The Speaker will re-connect with the Base, and audio
sound will be played.
To turn off 1-hour Timer after it has started:
Press the SLEEP button once to turn off the timer. The volume
knob ring light will stop flashing.
PAIRING AND CONNECT:
Your SEREONIC TV-SoundBox has already been paired and
ready to go right out of the box. In case that a re-pairing or
re-connection between the Speaker and the Base is needed or
you need to pair additional Speakers please follow the steps
described below in SPEAKERS PAIRING.
Copyright 2020 Serene Group, Inc. All rights reserved.
SPEAKERS PAIRING:
You can add up to 10 Speaker to work with your Base. If you
need to re-pair your existing Speaker or pair additional Speaker
to the Base, please follow the steps below.
Make sure the Speaker is fully charged.
Make sure your current Base is properly connected and the
green LED on the base is NOT blinking and steadily lit.
To pair a Speaker to the Base
01. Turn on the Speaker.
02. Press and hold the PAIRING button on the side of the
Speaker until the volume knob indicator starts blinking.
10.