Table of Contents
Advertisement
Driving
Starting the vehicle
To start your E-MEHARI, you should:
1.
Unlock your E-MEHARI using your
personal RFID key ring.
2.
Insert the key in the starting switch then
turn it to the MAR position. The welcome
screen appears.
3.
When you are invited to do so, turn
the key to the AVV position, holding it
until you hear an audible signal (beep).
Release the key, the switch automatically
returns to the MAR position. The
message "Ready to move off, Select D
or R" appears in the instrument panel
screen.
52
4.
Press the brake pedal.
5.
Put the drive selector to position "D"
(Drive) or "R" (Reverse).
6.
Release the manual parking brake.
Your E-MEHARI is a silent electric vehicle.
Your E-MEHARI does not generate any
noise when its electrical motor is started.
When performing any manoeuvre:
please pay increased attention to your
environment, especially to pedestrians,
cyclists and other vehicles moving on the
road.
https://www.automotive-manuals.net/
Switching off the vehicle
To park your E-MEHARI, you should:
1.
Place the vehicle in a secure area
suitable for parking.
2.
Immobilise the vehicle.
3.
Put the drive selector to position "N".
4.
Apply the manual parking brake.
5.
Switch off and remove the key from the
starting switch.
Control pedals
Your E-MEHARI has two control pedals:
(1) Accelerator pedal.
(2) Brake pedal.
Ensure that the pedals are always freely
accessible.
Advertisement
Table of Contents
