Table of Contents
Advertisement
Right Side
Refer to the diagram below to identify the components on this side of the Notebook PC.
USB Ports
USB Port (2.0/1.1)
2.0
The Universal Serial Bus is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing
devices, video cameras, modems, hard disk drives, printers, monitors, and scanners connected in a
series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run
simultaneously on a single computer, with peripherals such as USB keyboards and some newer moni-
tors acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that peripher-
als can be connected or disconnected without restarting the computer.
Optical Drive
The Notebook PC comes in various models with different optical drives. The Notebook PC's optical
drive may support compact discs (CD) and/or digital video discs (DVD) and may have recordable (R)
or re-writable (RW) capabilities. See the marketing specifications for details on each model.
SIR Port (Standard Infrared)
The standard infrared (IrDA) communication port allows convenient wireless data communication
with infrared-equipped devices or computers. This allows easy wireless synchronization with PDAs or
mobile phones and even wireless printing. If your office supports IrDA networking, you can have
wireless connection to a network anywhere provided there is a direct line of sight to an IrDA node.
Flash Memory Slot
Normally a PCMCIA or USB memory card reader must be purchased separately in order to use memory
cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs. This Notebook PC
has a built-in memory card reader that can read the following flash memory cards: Secure Digital (SD),
Multi-Media Card (MMC), Memory Stick (MS), Memory Stick Select (MS Select), Memory Stick Duo
(with MS adapter), Memory Stick Pro, and Memory Stick Pro Duo (with MS Pro adapter). The built-in
memory card reader is not only convenient, but also faster than most other forms of memory card readers
because it utilizes the high-bandwidth PCI bus. More information is provided in section 4 of this manual.
IMPORTANT! Never remove cards while or immediately after reading, copying, for-
matting, or deleting data on the card or else data loss may occur.
(Locations vary by model)
Optical Drive
Emergency
Eject
Knowing the Parts
Infrared Port
Electronic
Flash Memory
Eject
Slot
2
USB Port
21
Advertisement
Table of Contents
