Features And Controls - Briggs & Stratton 30219 Operator's Manual

KNOW YOUR GENERATOR
Read this operator's manual and safety rules before operating your generator.
Compare the illustrations with your generator to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Fuel Tank
Oil Fill Cap
Oil Drain Plug
120 Volt AC, 20 Amp
Duplex Receptacles
120 Volt AC, 20 Amp, Duplex Receptacles — May be
used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical, lighting,
appliance, tool and motor loads.
Air Cleaner — Protects engine by filtering dust and
debris out of intake air.
Choke Lever — Used when starting a cold engine.
Circuit Breakers (AC) — Push to reset circuit breakers
are provided to protect the generator against electrical
overload.
Data Tag — Provides model, revision and serial number of
generator. Please have these readily available when calling
for assistance.

FEATURES AND CONTROLS

Spark Arrester Muffler
Circuit Breakers
Air
Cleaner
Data Tag
Grounding Fastener
Fuel Tank — Capacity of four (4) U.S. gallons (15 l).
Fuel Valve — Used to turn fuel supply on and off to engine.
Grounding Fastener — Consult your local agency having
jurisdiction for grounding requirements in your area.
Oil Drain Plug — Remove to drain engine oil.
Oil Fill Cap — Check and fill engine with oil here.
Recoil Starter — Used to start the engine.
Rocker Switch — Set this switch to "On" before using
recoil starter. Set switch to "Off" to switch off engine.
Spark Arrester Muffler — Exhaust muffler lowers
engine noise and is equipped with a spark arrester screen.
5
Rocker Switch
Recoil Starter
Fuel Valve
Choke Lever