Settings; Setting Water Hardness - Asko D3122 Use And Care Manual

Settings

*NB!
Salt dispensers are not used in Australia or
New Zealand machines.

Setting water hardness

If you have a dishwasher with a water softener, you may need to change the setting de-
pending on the water's hardness level. Phone your local Water Board to check the water
hardness in your area. The dishwasher is set for low water hardness on delivery.
L2
L1
PROGRAM
S3
L6
1. Switch off the dishwasher with the main switch.
2. Press the main switch while holding in the Start/Stop button.
3. Release both buttons and the L7 light will flash.
4. Select desired setting (see table below) by pressing repeatedly on the Program
button.
Setting
All
extinguished
L1 lit
L1, L2 lit
L1, L2, L3
lit
L1, L2, L3, L4
lit
L1, L2, L3, L4,
L5, L11 lit
L1, L2, L3, L4,
L5, L6, L11, L12 lit
5. Confirm your selection by pressing the Start/Stop button. You now automatically leave
the settings menu and the selected setting remains until you want to change it.
22
L12
L4
L11
S1
S4
L10
L5
˚dH ˚fH
0-5* 0-9*
6-8 9-14
9-14 15-25
15-19 26-34
20-29 35-52
30-44 53-79
45 and 80 and
up up
L7
START
L8
STOP
S2
L9