Siemens VersiCharge Ultra 175 Installation Manual page 4

VersiCharge Ultra 175™ | Installation Manual
Important safety instructions.
Save these instructions.
Input:
950Vdc
190A
1ø, 240 Vac
50/60 Hz
3A
The VersiCharge Ultra 175 unit must be connected to a circuit
provided with appropriate over-current protection in accor-
dance with the National Electrical Code, ANSI/NFPA 70.
Tightening torque:
Wiring terminals:
30 Nm / 22 lb-ft
Service hatch:
2 Nm / 17.7 lb-in
Weather rating:
IP65 Electronics Enclosure
NEMA Type 3R
4
Usage limitations
No cable extensions of any kind shall be used to extend the
VersiCharge Ultra 175 cable to connect to a vehicle.
Adaptors shall not be used to connect a vehicle connector to
a vehicle inlet.