Art HD 131 User Manual page 2

This symbol, whenever it appears,
alerts you to the presence of uninsulated
dangerous voltage inside the enclosure-voltage
that may be sufficient to constitute a risk of shock.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user guide.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Power sources:
Connect the unit to mains power only of the type described in this user guide or marked on the rear panel. The
power source must provide a good ground connection.
Power cord:
Use the power cord with sealed mains plug appropriate for your local main supply as provided with the equip-
ment. If the provided plug does not fit into you outlet consult your service agent. Route the power cord so that it
is not likely to be walked on, stretched or pinched by items placed upon or against.
Grounding:
Do not defeat the grounding and polarization means of the power cord plug. Do not remove or tamper with the
ground connection on the power cord.
Moisture:
To reduce the risk of fire or electrical shock, do not expose the unit to moisture or use in damp or wet condi-
tions. Do not place container of liquid on it.
Heat:
Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire hazard.
Locate the unit away from any equipment, which produces heat such as: power supplies, power amplifiers and
heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke especially that associated with smoke machines.
Handling:
Protect the controls from damage during transit. Use adequate padding if you need to ship the unit. To avoid
injury to yourself or damage to the equipment take care when lifting, moving or carrying the unit.
Servicing:
Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, the power cord or
plug becomes damaged during a lightning storm or if smoke odor or noise is noted. Refer servicing to qualified
technical personnel only.
Installation:
Install the unit in accordance with the instruction printed in the user guide.
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, wherever it appears, alerts you
to important operating and maintenance
instructions in the accompanying literature.
Please Read manual.
2