Specifications - Art HD 131 User Manual

SPECIFICATIONS:

EQUALIZER
Bands
Type / Accuracy
Travel
Range
Overall Gain Range
INPUTS
Type
Connectors
Impedance
Maximum Level
OUTPUTS
Type
Connectors
Impedance
Maximum Level
RFI filters
Passive Bypass Switches
Overload LED Threshold
High Pass Filter
Low Pass Filter
Frequency Response
THD + Noise
IM Distortion (SMPTE)
Signal to Noise Ratio
Headroom
Dynamic Range
Channel Separation
Common Mode Rejection
LINE VOLTAGE
INPUT AC POWER
CONSTRUCTION
SIZE
WEIGHT
2 x 15, 2/3 Octave, ISO Spacing (HD215)
1 x 31, 1/3 Octave, ISO Spacing (HD131)
2 x 31, 1/3 Octave, ISO Spacing (HD231)
Constant Q, 3% Center Frequency
20mm (Positive Center Detent)
+/-6dB or +/-12dB (Selectable)
Off to +6dB (Unbalanced out) Sliders Centered
Off to +12dB (Balanced out) Sliders Centered
Active Balanced/Unbalanced
3-Pin XLR, 1/4" TRS (Balanced), Euroblock
24k Ohms Balanced; 12k Ohms Unbalanced
+22dBm (Level Control at Center)
Active Balanced/Unbalanced
3-Pin XLR, 1/4" TRS (Balanced), Euroblock
Typical <150 Ohms
+22dBm (Balanced) (600 Ohm load)
+16dBm (Unbalanced) (2k Ohm load)
Yes
Yes
6 dB (Below Clipping), (all filters set to flat)
10-250Hz, 12dB/Oct
3k-40kHz, 12dB/Oct
20-20kHz, +/-0.5dB
less than .01% (20Hz-20kHz, 0dBu)
0.005%
greater than 98dB, Ref: 0dBu, (Balanced) HD215
greater than 95dB, Ref: 0dBu, (Balanced) HD131/231
20Hz - 20kHz, unweighted.
+22dB, Ref, 0dBu, (Balanced) (+/-6dB and +/-12dB range)
greater than 120dB, (Balanced) HD215
greater than 117dB, (Balanced) HD131/231
greater than 60dB
50dB typical
95-125VAC, 50/60Hz
190-250VAC, 50Hz
9 Watts (HD131 and HD215), 14Watts (HD231), typical
All Steel Chassis
1.75" H *19" W *7.0" D (1U) (HD131 and HD215)
(4.45cm * 48.3cm * 17.8cm)
3.5" H *19" W *7.0" D (2U) (HD231)
(8.9cm * 48.3cm * 17.8cm)
7.5 Ibs (3.4 kg). (HD131 and HD215)
12 Ibs (5.4 kg). (HD231)
14