Restoring defaults
Use the setup menu to restore the camera settings to their default
values as follows:
1. Turn on the camera and switch to picture mode.
2. Press Menu.
3. Move the 5-way button left or right to
navigate to the Setup menu.
4. Move the 5-way button up or down to
highlight the Default submenu.
5. Move the 5-way button right to open
the Default submenu.
6. Move the 5-way button up or down to
select Confirm to reset the camera or
Cancel to cancel the operation.
7. Press OK when finished.
Formatting the memory
Use the following procedure to format the camera's memory:
1. Turn on the camera and switch to picture mode.
2. Press Menu.
3. Move the 5-way button left or right to
navigate to the Setup menu.
4. Move the 5-way button up or down to
highlight the Format submenu.
5. Move the 5-way button right to open
the Format submenu.
6. Move the 5-way button up or down to
select Confirm to format the memory
or Cancel to cancel the operation.
7. Press OK when finished.
The camera memory is formatted and all the
files including the protected files are deleted.
Warning: Formatting memory will cause all files stored in memory to be erased.
Make sure you have backed up any files you want to keep.