Table of Contents
Advertisement
User Manual
Setting the resolution
Use this menu item to select the resolution of the image as follows:
1. Turn on the camera and switch to picture mode.
2. Press Menu.
3. Move the 5-way button left or right to
4. Move the 5-way button up or down to
5. Move the 5-way button right to open
6. Move the 5-way button up or down to
7. Press OK when finished.
Setting the date stamp
The date stamp menu enables you to imprint the time and the date
on the image. To set the date stamp, do the following:
1. Turn on the camera and switch to picture mode.
2. Press Menu.
3. Move the 5-way button left or right to
4. Move the 5-way button up or down to
5. Move the 5-way button right to open
16
navigate to the Capture menu.
highlight the Resolution submenu.
the Resolution submenu
select from the scene options:
– 5.0M
– 3.1M
– 1.3M
– VGA
navigate to the Capture menu.
highlight the Date stamp submenu.
the Date stamp menu.
Advertisement
Table of Contents
