Table of Contents
Advertisement
The REACT 2001 GUI software Release 1.900
supports ANSI T1.107-1995.
Due to SLC Series 5 channel bank BCU
constraints, provisioning of the Series 5 Total
Reach DDS-DP may be viewed but not
changed via Digital System 6.
Out-of-Band Diagnostics
ASC 9Eh
Figure 6. Total Reach OCU-R Remote End Initiated Loopback, Local Loop
ASC 9Eh
Figure 7. Total Reach OCU-R Remote End Initiated Loopback, Customer Loop
6
NOTE
NOTE
TR
DDS
DP
Local Loop
Push once for Total Reach
ASC 9Eh
TR
DDS
DP
Local Loop
Push twice for TROCU-R
Section 61433105L2, Issue 4
5. DEPLOYMENT GUIDELINES
Table 6
• All loops must be nonloaded.
• Actual Measured Loss (AML) should not exceed 50
dB at 13.3 kHz (135
frequency of Total Reach DDS.
4-Wire
CPE Interface
TR
OCU-R
Loopback
Pushbutton
DDS-DP Loopback
4-Wire
CPE Interface
TR
OCU-R
Loopback
Pushbutton
Loopback
Table 5
termination), the Nyquist
Test
Set
Test
Set
61433105L2-5D
Advertisement
Table of Contents
