Hard Drive - Apricorn EZ-BUS-DTS-EKIT User Manual

To Reformat in OS 9.x:
Caution: This will destroy any data on the hard drive. Backup any
data before you continue with the reformatting of the EZ Bus DT

hard drive.

1. Make sure the EZ Bus DT is plugged into the USB port.
2. Disable the fi le exchange in the Extensions Manager :
a. From the Apple Menu , select Control Panel , then Extensions
Manager .
b. From the list: uncheck the on/off button next to the File
Exchange .
c. Click Restart .
Your Macintosh will restart and you will get the following message:
"This disk is unreadable by this computer
Do you want to initialize the disk?"
3. Enter EZ Bus DT into the Name box.
4. From the drop down list, select Mac OS Extended and click the
Initialize button. After the drive is initialized the drive named EZ Bus
DTC will appear on your desktop.
5. To confi rm that the EZ Bus DT hard drive is properly formatted, select the
EZ Bus DT drive, then Select: File, Get Info, General Information .
The drive should read Mac OS Extended.
6. You can now enable the fi le exchange extension.
a. From the Apple Menu , select Control Panel, Extensions
Manager .
b. Check the on/off box next to File Exchange .
c. Click Restart .
www.apricorn.com 22