Advertisement
Marinating with your FoodSaver Appliance
For use with Foodsaver® Smartseaf
Technology (V3000 Series) Models
Your FoodSaver*' Vacuum Sealing System has a
special Quick Marinate Cycle which will last about
ten minutes. The vacuum motor will "hold" the
vacuum for several minutes then release the
vacuum allowing the food to "rest" for 30 seconds.
This process will then repeat two more times.
This "Pulsing" action of "vacuuming and resting"
will allow for quicker marinating. When the Quick
Marinate Cycle is completed the appliance will
beep to signal marinating is complete.
The FoodSaver" Quick Marinator Canister is
the perfect FoodSaver® Accessory for marinating
foods. Foods will marinate in minutes when
vacuum packaged because the vacuum process
opens the pores of the food and absorbs the
marinade more quickly.
Important Note: During the Quick Marinate Cycle,
make sure knob on accessory lid is set to OPEN.
Do not set knob to Vacuum. The Vacuum position
on the knob will allow the Quick Marinating
Canister to be used for extending vacuum storage.
1. Prepare enough of your favorite marinade to fully
cover food inside a marinating canister. Always
leave at least one inch of space between contents
and top of rim.
2. Make sure rubber gasket underneath the lid as
well as rim of marinating canister is free from
food materials.
3. Make sure Accessory Hose is securely inserted
into port on the FoodSaver® Quick Marinator lid.
4. Make sure knob on accessory lid is set to the
OPEN/MARINATE position.
5. Make sure lid is firmlyattached to marinator base.
6. Press Marinate button 3 on the control panel.
7. Your FoodSaver® Vacuum Sealing System
will now begin the Quick Marinate Cycle. The
Marinate Indicator Light will flash to indicate
the marinating process has begun.
8. During the initial vacuum cycle the Marinate
Mode Indicator will illuminate. While Marinating,
the Vacuum Meter Display will blink during the
Vacuum Hold or Rest Cycle.
9. To preserve food safely, after completing the
marinating cycle, the appliance will signal with
short beeps to indicate your Quick Marinate
Cycle is completed. Press any button to silence
the signal.
You may now cook or refrigerate your marinated food.
For Use With All Other Foodsaver
Vacuum Sealing Appliance Models
. Prepare enough of your favorite marinade to fully
cover food inside a marinating canister. Always
leave at one inch of space between contents and
top of rim.
. Make sure rubber gasket underneath the lid as
well as rim of marinating canister is free from
food materials.
. Insert one end of the Accessory Hose into the
Accessory Port on your FoodSaver® appliance.
. Make sure Accessory Hose is securely inserted
into port on the FoodSaver® Quick Marinator lid.
Advertisement
