Cooler Temperature Settings; Door Open Alarm Function - Smeg FS18EV3HX Instruction Booklet

•To cancel, press the cooler set button

Cooler temperature settings

• The initial temperature value for the cooler setting indicator is "Eco".
• Press the cooler set button once
• When you first press the button, the previous value will appear on the setting indicator
of the cooler.
• Whenever you press this button, a lower temperature will be set (+8°C, +6°C, econo-
my, +4°C, +2°C, or super cool).
• If you press the cooler set button until the super cool symbol appears on the cooler
setting indicator, and do not press any buttons for 1 second, super cool will flash.
• If you continue to press the same button, it will restart from +8°C.

Door Open Alarm Function

If cooler door is opened more than 2 minutes, appliance sounds 'beep beep'.
Screen Saver Mode
Purpose
This mode saves energy by switching all control panel lights off for as long as the
control panel remains inactive.
How to Use
• Screen saver mode will be activated automatically for energy saving.
• If you do not press any other button within 30 seconds after activating the screen
saving mode, lights of the control panel will go off.
• If you press any key while the lighting of the control panel is off, current settings will
appear on the display to let you make any change you wish. If you do not cancel the
screen saving mode or press any key for 30 seconds, control panel will go off again.
• To cancel the screen saving mode, first of all, you need to press any key to activate the
keys, select "5" set value and then press and hold the cooler set button for 10
seconds.
• To reactivate screen saving mode, select "5" set value and then press and hold the
cooler set button for 10 seconds.
EN - 9 -