Troubleshooting - SEVERIN WK 3477 Instructions For Use Manual

Trouble shooting
Problem
Functions cannot be
activated.
Water doesn't heat up,
and beep signals are
heard.
Heating-up takes longer
than expected.
Increased noise during
heating.
Display shows continuous
error code E....
Should you be unable to solve the problem using the table, please contact our Customer
Service. The contact data can be found in the appendix to this manual.
24
Cause
Appliance is not plugged
in.
Socket is defective.
Appliance is not placed on
base correctly.
Safety cut-out is activated. Appliance needs to cool down or
The water container
temperature is higher than
that selected.
Build-up of scale deposits. Descale the appliance (see
Build-up of scale deposits. Descale the appliance (see
Electrical fault in the
appliance.
Remedy
Connect appliance to mains.
Check the socket with a different
appliance.
Position it properly.
be descaled.
Select a higher temperature.
Descaling).
Descaling).
Contact our Customer Service.