Dometic CRE0050 Installation And Operating Manual page 26

Using the refrigerator
I
NOTE
• Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 29).
• Do not use force to press the flap of the freezer.
• Do not pull out the dividing wall if there is ice in the freezer.
• Do not remove the sticker which covers the control element (fig. 4,
page 4).
8.1 Energy saving tips
• Choose a well ventilated location which is protected from direct sunlight.
• Allow hot food to cool down first before you put it in the refrigerator.
• Do not open the refrigerator more often than necessary.
• Do not leave the door open for longer than necessary. If the door is left open for
more than 5 minutes, the light starts to flash.
• Defrost your refrigerator as soon as a layer of ice forms.
• Avoid unnecessarily low temperature settings.
8.2 Switching on the refrigerator
➤ Switch the refrigerator on by pressing the
I
NOTE
8
After switching on, the refrigerator needs some time before the com-
pressor starts up.
8.3 Setting the temperature
➤ Press the
button repeatedly until the desired temperature level is set.
Each button press illuminates a LED. The illuminated LED changes top down.
To switch from the last level to the first level press the
26
button.
button again.
CRE
EN