Dometic CRE0050 Installation And Operating Manual page 24

Installing and connecting the refrigerator
➤ Determine the required cross section of the cable in relation to the cable length
according to fig. d, page 10.
Key to fig. d, page 10:
Coordinate axis
l
∅
A
NOTICE!
Make sure the polarity is correct.
➤ Before starting up the device for the first time, check whether the operating
voltage and the battery voltage match (see type plate).
➤ Connect your refrigerator to a plug socket which is fuse-protected with at least
15 A (at 12 Vg) or 7.5 A (at 24 Vg) (fig. e 1, page 11).
➤ Connect the red cable (fig. e rd, page 11) to the positive terminal of the battery.
➤ Connect the black cable (fig. e bk, page 11) to the negative terminal of the
battery.
7.8 Connecting the refrigerator to AC voltage
D
DANGER! mortal danger!
• Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
• If you are operating your refrigerator on board a boat with an
AC power supply using a shore connection, you must install a
residual current circuit breaker between the AC power supply and
the refrigerator.
Seek advice from a trained technician.
You can connect the refrigerator to an AC power if you use the MPS35 rectifier
(accessory).
The MPS35 rectifier features a priority circuit which conserves the battery con-
nected. When an power supply is used, the rectifier automatically switches from bat-
tery to mains operation.
When disconnected from the AC power supply, the rectifier automatically switches
back to battery operation. Mains operation via the rectifier always takes priority over
battery operation.
24
Meaning
Cable length
Cable cross section
CRE
Unit
m
mm²
EN