Technical Data; Statement Of Warranty - Flymo SimpliGlide 300 Operator's Manual

Problem Possible Cause
Lawn is not cleanly mowed
Blade is blunt or damaged.
Cutting height is too low.
Poor flotation Underside of the mower is
dirty.
Cutting height is too low.
Fan is damaged.
If poor flotation persists, contact the local approved Service
Centre.
NOTE: For any other malfunctions please contact the FLYMO service depart-
ment. Repairs must only be done by FLYMO service departments or specialist
dealers approved by FLYMO.

7. TECHNICAL DATA

Electric Hover Lawnmower Unit
Rated power
W
Mains voltage
V
Mains frequency
Hz
Speed of rotation cutting
R/min
blade
Cutting width cm
Cutting height adjustment
mm
(4 positions)
Weight kg
Sound pressure level L
1)
dB (A)
pA
Uncertainty k
pA
Sound power level L :
2)
WA
measured / guaranteed
dB (A)
Uncertainty k
WA
Hand / arm vibration a
1)
m/s
vhw 2
Uncertainty k
vhw
Measuring process complying with:
NOTE: The stated vibration emission value has been measured according to
a standardised test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of
exposure. The vibration emission value can vary during actual use of the electric power
tool.
Please consult the supply authority, if necessary, that the equipment is
connected only to a supply of an impedance no more than 0.354 Ω.
This maximum permissible system impedance at the interface point of
the user's supply is according to the test value of SimpliGlide 360V.
8. ACCESSORIES
FLYMO Replacement As replacement for blunt blade.
Blade for 30 cm
FLYMO Replacement As replacement for blunt blade.
Blade for 33 cm
FLYMO Replacement As replacement for blunt blade.
Blade for 36 cm

9. STATEMENT OF WARRANTY

I. Husqvarna's Manufacturer's Warranty
(Australia and New Zealand)
A. General Terms & Conditions
Husqvarna provides a 2 year manufacturer's warranty to the initial pur-
chaser for each new product produced by Husqvarna that is sold by
an Authorised Husqvarna Supplier in Australia or New Zealand. This
warranty provides such initial purchaser with a guarantee against faulty
workmanship in manufacture and /or defective components for the
warranty period from the date of purchase.
The benefits given by this manufacturer's warranty are in addition to
other rights and remedies of the consumer under law in relation to the
goods to which this warranty relates (see Part II and Part III).
SG300NZ-20.960.01.indd 5
Remedy
v Replace the blade.
v Raise the cutting height.
v Clean the underside of the
mower.
v Raise the cutting height.
v Check and replace the fan.
Value Value Value
(30 cm) (33 cm) (36 cm)
1700 1700 1800
230 – 240 230 – 240 230 – 240
50 50 50
4200 4200 4200
30 33 36
10 – 30 10 – 30 10 – 30
6.7 6.7 6.9
84 83 80
3 3 3
92 / 96 92 / 96 92 / 96
3.9 3.2 3.2
1.5 1.5 1.9
1.5 1.5 1.5
AS/NZ 60335­2­77 RL 2000/14/EC
1) 2)
Reference no. FLY094
Part no. 529370590
Reference no. FLY095
Part no. 529370790
Reference no. FLY096
Part no. 529370890
B. Making a Claim
If any product supplied by Husqvarna is found to be defective due to faulty
manufacture and / or defective components within the warranty period,
Husqvarna through its Authorised Dealers will repair or replace the product
to the customer at Husqvarna's cost providing;
• Proof of purchase is provided.
• The fault is not caused by misuse, neglect, adjustments and /or
modifications by the consumer.
• The consumer presents the product at an Authorised Dealer's premises.
• Failure has not occurred through normal wear and tear.
• Any costs incurred to obtain warranty consideration or services is the
consumer's responsibility, including shipping and handling, travel
expense, lost time, pickup and delivery.
C. Consumer Responsibilities
Please take reasonable steps to maintain the products as explained in the
maintenance section of the owners / operators manual or handbooks. We
are not responsible if you cause the product to become of unacceptable
quality or if the product is damaged by abnormal use.
II. Additional Statutory Warranties (Australia Only)
Our goods come with guarantees that cannot be excluded under the
Australian consumer law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
III. Additional Statutory Warranty (New Zealand Only)
In New Zealand the manufacturer's warranty (see Part I) is in addition
to the rights and remedies provided by the New Zealand Consumer
Guarantees Act.
IV. What Legal Entity Is Providing These Warranties
The herein described warranties (both manufacturers and statutory)
are provided by the following entities:
A. Within Australia this warranty is provided by
Husqvarna Australia Pty Ltd
(ABN 45 115 475 619)
4 Pioneer Ave
Tuggerah NSW 2259
Ph: 1300 804 213
B. Within New Zealand this warranty is provided by
Husqvarna New Zealand Ltd
(Company No. 111861)
51 Aintree Avenue Airport Oaks
Manukau 2022
Ph: 09 920 2410
Consumables:
The blade is a consumable and is not included in the warranty.
5
07.10.20 13:53