Advertisement
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off the right earbud manually by pressing and holding the Right
button until the LED flashes red.
3. To enter pairing mode, press and hold (3 seconds) the Right button until
the LED flashes blue.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra earbuds from the list. Alternatively, wear the earbud to hear the
voice guided instructions.
Enter "0000" (four zeros) if you are asked for a PIN.
If pairing is successful, your earbuds will appear in the list of connected
Bluetooth devices on your mobile device. The Bluetooth connection will
also be announced in the earbuds.
Note
Images are for guidance purposes only. The image displayed may differ
slightly from your device, however the content is still relevant and
accurate.
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips,
Optionally, try using the
steps for pairing with a mobile device.
https://www.jabra.co.nz/supportpages/jabra-elite-75t/100-99092000-40/faq/8ec1bcdc-
9b43-465e-b2c8-1faac22ef6f8
Bluetooth Pairing Guide
see
here.
which provides detailed
06/04/2021 01:17
Page 2 of 2
Advertisement
