NETGEAR Nighthawk C6900 User Manual page 9

LED Description
Internet
•
•
•
•
2.4 GHz radio
•
•
5 GHz radio
•
•
Ethernet
•
•
WiFi On/Off but-
Pressing this button for two seconds turns the WiFi radios in the modem router on and off. If
ton with LED
this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and
you cannot use WiFi to connect to the modem router.
WPS button with
This button lets you use WPS to join the WiFi network without typing the WiFi password.
LED
The WPS LED blinks during this process and then lights solid.
Hardware Setup
Nighthawk AC1900 WiFi Cable Modem Router
Solid green. The modem router is online.
Blinking green. The modem router is synchronizing with the cable provider's cable
modem termination system (CMTS).
Slow blinking amber and green. The modem router reached the traffic meter limit.
(For information about the traffic meter, see Monitor Internet Traffic on page 67.)
Off. The modem router is offline.
Green. The 2.4 GHz radio is on.
Off. The 2.4 GHz radio is off.
Green. The 5 GHz radio is on.
Off. The 5 GHz radio is off.
Green. A device is connected to an Ethernet port and powered on. Each Ethernet port
has LEDs on the rear panel.
Off. No device is connected to an Ethernet port.
10 User Manual