Download Print this page
NETGEAR AC1750 Quick Start

NETGEAR AC1750 Quick Start

Wifi cable modem router
Hide thumbs Also See for AC1750:

Advertisement

Quick Links

Join the WiFi Network
You can either use Wi-Fi Protected Setup (WPS) or select your WiFi network and
type its password.
Join the WiFi Network Using WPS
For help with the WPS button on your WPS-enabled device, check the instructions
or online help that came with that device. Some older equipment cannot use
WPS.
Note: WPS does not support WEP security. If you are using WEP security, use the
manual method.
1. Press the WPS button on the cable modem router for three to five seconds.
2. Within two minutes, on your WPS-enabled device, press its WPS button.
The WPS-enabled device connects to your cable modem router's WiFi
network.
3. Repeat Step 1 through Step 3 to add other WPS-enabled devices.
Select Your WiFi Network and Enter Its Password
1. On your WiFi-enabled computer or mobile device, open the WiFi connection
manager.
The WiFi connection manager scans for WiFi networks in your area.
2. Find and select your cable modem router's WiFi network name (SSID).
The SSID is on the cable modem router label.
3. Enter the cable modem router's password (or your custom password if you
changed it) and click the Connect button.
The password is on the cable modem router label.
4. Repeat Step 1 through Step 3 to add other computers or WiFi devices.
Support
Thank you for purchasing this NETGEAR product. You can visit
www.netgear.com/support to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you
use only official NETGEAR support resources.
Customer-owned cable modem routers might not be compatible with certain
Internet service providers (ISPs). Check with your ISP to confirm that this NETGEAR
cable modem router is allowed on your ISP's network.
If you are experiencing trouble installing your cable modem router, contact
NETGEAR at 1-866-874-8924.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
NETGEAR, Inc.
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any
350 East Plumeria Drive
non‑NETGEAR trademarks are used for reference purposes only.
San Jose, CA 95134, USA
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
Quick Start
AC1750 WiFi Cable Modem Router
Model C6300v2
Package Contents
Cable modem router
Ethernet cable
Power adapter

Advertisement

loading

Summary of Contents for NETGEAR AC1750

  • Page 1 4. Repeat Step 1 through Step 3 to add other computers or WiFi devices. Cable modem router NETGEAR, Inc. © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any 350 East Plumeria Drive non‑NETGEAR trademarks are used for reference purposes only.
  • Page 2 Set Up the Hardware 6. Connect your computer or mobile device to the cable modem router with Your cable modem router’s serial number and MAC address are on the Ethernet or WiFi: cable modem router label. • Ethernet. Use an Ethernet cable to connect a computer to an Ethernet The following table lists contact information for ISPs that support your port on the cable modem router.

This manual is also suitable for:

C6300v2