Safety Recommendations; Maintain Safety With Electricity - Cisco Stealthwatch Hardware Deployment And Configuration Manual

Safety Recommendations

The following information helps to ensure your safety and to protect the chassis. This
information may not address all potentially hazardous situations in your working
environment, so be alert and exercise good judgment at all times.
Observe these safety guidelines:
Keep the area clear and dust free before, during, and after installation.
l
Keep tools away from walkways, where you and others might trip over them.
l
Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains that
l
could get caught in the chassis.
Wear safety glasses if you are working under any conditions that might be
l
hazardous to your eyes.
Do not perform any action that creates a potential hazard to people or makes the
l
equipment unsafe.
Never attempt to lift an object that is too heavy for one person.
l

Maintain Safety with Electricity

Before working on a chassis, be sure the power cord is unplugged.
Follow these guidelines when working on equipment powered by electricity:
Do not work alone if potentially hazardous conditions exist anywhere in your work
l
space.
Never assume that power is disconnected; always check.
l
Look carefully for possible hazards in your work area, such as moist floors,
l
ungrounded power extension cables, frayed power cords, and missing safety
grounds.
If an electrical accident occurs:
l
Use caution; do not become a victim yourself.
l
Disconnect power from the system.
l
If possible, send another person to get medical aid. Otherwise, assess the
l
condition of the victim, and then call for help.
Determine whether the person needs rescue breathing or external cardiac
l
compressions; then take appropriate action.
Use the chassis within its marked electrical ratings and product usage instructions.
l
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
Appendix A. Installation Preparation
- 64 -