Technical Specifications - Siemens SIMATIC ET 200AL Manual

Technical specifications

6.1 Technical specifications
Technical specifications of the AI 4xRTD/TC 4xM12 analog input module
The following table shows the technical specifications as of 08/2020. You will find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7144-5KD50-0BA0/td?dl=en).
Article number
General information
Product type designation
HW functional status
Firmware version
Product function
• I&M data
Engineering with
• STEP 7 TIA Portal configurable/integrated
from version
• STEP 7 configurable/integrated from ver-
sion
• PROFIBUS from GSD version/GSD revision
• PROFINET from GSD version/GSD revision
Supply voltage
Load voltage 1L+
• Rated value (DC)
• permissible range, lower limit (DC)
• permissible range, upper limit (DC)
• Reverse polarity protection
Input current
Current consumption (rated value)
from load voltage 1L+ (unswitched voltage)
from load voltage 2L+, max.
Power loss
Power loss, typ.
40
6ES7144-5KD50-0BA0
AI 4xRTD/TC
FS01
V1.0.x
Yes; I&M0 to I&M3
STEP 7 V16 or higher
V5.5 SP4 and higher
GSD as of Revision 5
GSDML V2.34
24 V
20.4 V
28.8 V
Yes; against destruction
25 mA; without load
4 A; Maximum value
4 A; Maximum value
0.6 W
Analog input module AI 4xRTD/TC 4xM12 (6ES7144-5KD50-0BA0)
Equipment Manual, 08/2020, A5E48753535-AA
6