Assembly; How To Use Your Milk Frother - Breville the Choc & Cino LMF200 Instruction Book

a

Assembly

BEFORE FIRST USE
Remove all promotional labels and packaging
materials from the milk frother. Ensure that all
parts and accessories listed are included before
discarding the packaging.
The mixing and frothing discs are packaged
separately. Remove the discs from the
packaging before cleaning.
Wash the milk jug, frothing disc, mixing disc,
lid and lid seal in warm soapy water and dry
thoroughly. Wipe exterior with a soft damp
cloth and dry thoroughly. Reassemble before
use.
w
WARNING
Never immerse the power base, power cord or
power plug in water or allow moisture to come
into contact with these parts.
8
o
Functions

HOW TO USE YOUR MILK FROTHER

n
NOTE
One magnetic disc may be stored using the
magnetic base storage compartment under the
milk frother. The other can be stored inside the
jug when not in use.
1. Place the milk frother on a dry, stable and
level surface. Insert the power plug into a
230V or 240V power outlet and switch on
at the power outlet. The milk frother will
beep once to indicate that it is in standby
mode.
2. Lift the milk jug using the handle to
remove from the power base and remove
the transparent lid from the milk jug.
3. Insert the mixing or frothing disc onto the
milk jug shaft of the milk jug. The magnetic
pull will secure the disc into place.
4. Pour the required amount of cold, fresh or
freshly opened milk into the milk jug and
replace the transparent lid.