Loading A Cd/Dvd; Printable Cd/Dvds; Cd/Dvd Handling Precautions - Epson EcoTank ET-8500 Series User Manual

Hide thumbs Also See for EcoTank ET-8500 Series:
Table of Contents

Advertisement

Loading Papers and CD/DVDs
❏ Rear paper feeder
Load a sticker at the center of the the rear paper feeder with the printable side facing up.

Loading a CD/DVD

Printable CD/DVDs

You can print on a circular 12-cm CD/DVD labelled as suitable for printing, for example "printable on the label
surface" or "printable with ink jet printers."
You can also print on Blu-ray Discs™.

CD/DVD Handling Precautions

❏ See the documentation provided with your CD/DVD for more information on handling the CD/DVD or
writing data.
❏ Do not print on the CD/DVD before writing your data to it. If you do, fingerprints, dirt, or scratches on the
surface may cause errors while writing data.
❏ Depending on the CD/DVD type or printing data, smearing may occur. Try making a test print on a spare CD/
DVD. Check the printed surface after waiting for one full day.
❏ Compared to printing on genuine Epson paper, the print density is lowered to prevent ink from smearing on the
CD/DVD. Adjust the print density as necessary.
❏ Allow the printed CD/DVDs at least 24 hours to dry avoiding direct sunlight. Do not stack or insert the CD/
DVDs into your device until they are completely dry.
❏ If the printed surface is sticky even after it has dried, lower the print density.
❏ Reprinting on the same CD/DVD may not improve the print quality.
❏ If the disc tray or the internal transparent compartment are accidentally printed on, immediately wipe off the
ink.
>
>
Loading a CD/DVD
CD/DVD Handling Precautions
36

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecotank l8160 series

Table of Contents