Table of Contents
Advertisement
BERNINA
Overlocker Workbook 1
Fabric:
Lightweight, soft, 4" x 6"
Needle:
80/12 Universal
Thread:
4 cones of overlocker thread (blue, red, green, yel-
low)
Presser Foot:
Standard
Thread the overlocker for a 4-thread overlock stitch using
thread colors to match the color-coded threading path on the
overlocker. Adjust all thread tension settings as indicated be-
low.
With differential set at N or 1, sew on one 6" edge. If fabric is
lightweight enough you will have a puckered edge.
Adjust the differential to 0.7. Sew along the other 6" edge, trim-
ming slightly. With a low differential setting, the puckered edge
should be eliminated.
Mark the differential settings on the fabric sample.
Return the differential feed setting to 1.
05/14/2020
Differential Feed: Soft Fabrics
0.7mm
Suggested Settings
Upper Looper
Lower Looper
Left Needle
Right Needle
Stitch Length
Cutting Width
Differential Feed
1 or N
(normal)
L 460/L 450
3-5
3-5
3-5
3-5
2.5
6
1
11
Advertisement
Table of Contents
